|
|
|
|
|
|
MAT TRIGGER PACKAGE
|
Sale Price: $248.77
|
|
|
MAT TRIGGER PACKAGE CLIC PICTURE TO SEE IT WORK
(1) 18" x 24" Pressure Sensing Mat - Triggers prop when person steps on it. YOU GET 1 18 X 24 MAT AND 1 ET- 1 TRIGGER DEVICE
Detailed Description
Plug the ET1 into any 110v AC outlet.
Plug your 110v prop into the ET1 "AC OUT" socket.
Plug a pressure sensitive mat, sonic sensor, or manual button trigger into the ET1 "TRIP" port.
Adjust the ET1 "On Time" and "Recycle Time" dials to optimum settings for your
Mode of Operation
The ET1 is triggered by person stepping on mat, proximity sensor, or manual button.
AC Outlet on the ET1 becomes "live" and supplies power to prop for duration of "On Time" setting.
Prop will not be re-triggered until "Recyle Time" has expired.
Operating Parameters
All props and accessories attached to the "AC OUT" socket must not draw more than 10 amps.
The ET1 is not waterproof and must be placed in a location that will not get wet.
The ET1 is desiged from heavy duty components for years of worry-free use.
|
|
|
|
|
|
|
|
|
|
PRESSURE PAD HEAVY DUTY HP1864
|
|
Sale Price: $428.77
|
|
|
The instant someone stands on pad, power is activated to a 4 plug outlet that can trigger sound, lights, horns, strobes, and small devices. Uses standard AC power.
|
|
|
|
|
|
|
|
|
|
MANUAL POWER STRIP HP0101
|
|
Sale Price: $108.77
|
|
|
Power your electric props, sound, and lights with the flick of a switch! Hand control with 4 plugs on a 30 foot cord.
|
|
|
|
|
|
|
|
|
|
Manual Trigger button with 15 feet of cable.
|
|
SALE: $48.77
|
|
|
Manual Trigger button with 15 feet of cable.
Trigger your props with the push of a button! Great for props that require specific and variable timing. You, or an actor, can activate your prop at •
Manual Trigger button with 15 feet of cable.
•Allows staff to trigger prop by pressing button.
•Machined from very durable aluminum for years of use. just the right time for maximum scare each and every time!
|
|
|
|
|
|
|
|
|
|
MOTION SENSOR WITH TIMER
|
List Price: $88.77
SALE: $68.77
You save $20.00!
|
|
|
Detects motion and activates any 110v AC device that is plugged into provided outlet (socket). 180° detection zone.
Simply plug one of the cables into a standard 110v AC outlet and then plug your props into the provided outlet.
The on time is adjustable from a minimum of approximately 2 to 3 seconds. The next time is about 10 to 20 seconds, with large increments up to a high of about 10 to 15 minutes.
•Max load must not exceed 300-watts (about 3-amps). For reference, a standard 100-watt light bulb uses about 1-amp)
•180 degree detection zone
•Works with our barrel poppers, haunted books, lights, and any other prop and AC device
|
|
|
|
|
|
|
|
|
|
BEAM SENSOR WITH 12V POWER SUPPLY
|
|
SALE: $128.77
|
|
|
Triggers contact closure, AC or DC prop units
Mount this reflective photoelectric beam detector on wall, mount reflector on opposite
wall, screw provided 6' cable into your prop controller or triggerable audio playback unit. When people walk by their body will trigger the controller.
|
|
|
|
|
|
|
|
|
|
HAT RIDE TRIGGER
|
|
SALE: $388.77
|
|
|
Our Hay Ride Trigger is a simple to use vehicle motion detection system.
Our Hay Ride Trigger is a simple to use vehicle motion detection system that operates on the principle that any moving ferrous metal object will distort the Earth's magnetic field to some degree. The technology used to measure this distortion is one of the most reliable forms of outdoor detection available. The Hay Ride Trigger will only sense moving iron or steel and will not be set off by people, animals, wind, etc.
The sensor is best located next to the vehicle path or buried underground.
•Includes: Console, sensor, transformer, and 100 feet of cable
•Console contains 2 relays for triggering prop controllers, turning on lights, etc.
|
|
|
|
|
|
|
|
|
|
Wall Mounted Button Trigger
|
|
SALE: $88.77
|
|
|
This wall mounted push button is great for actors to use to activate props.
•Large green 2 inch square push button
•The mounting plate is the size of a standard wall switch plate
•Button optionally lights up if you hook up power to it (25,000 hour replaceable bulb)
•SPDT momentary contacts rated 10A @ 35VDC
|
|
|
|
|
|
|
|
|
|
STROBE ALARM W/ BEAM SENSOR
|
|
SALE: $109.88
|
|
|
Name: Strobe Alarm w/ Beam Sensor
Short Description:
When the beam is broken, the strobe and siren go off. Guaranteed to startle! Some simple wiring is required (wiring diagram is included)
Long Description:
Includes
12vDC Strobe w/ Siren
12vDC 1Amp Power Supply
Beam Sensor
Power Supply Adapter: Wires
Diagram for all required wiring
|
|
|
|
