LIGHTING CONTROL CHANNELS
FireFly® model FF-351 is a premium microprocessor-controlled three-channel lightning simulator which offers two channels of lightning, plus a third dedicated dimmer channel. Two channels can be used for lightning effects plus one channel can be connected to house lights, porch lights or even a lamp in the window for dimming effects. When there is a close “lightning strike”, not only do you see the lightning flash, but lights connected to the third channel will dim and flicker as though power is about to go out. Very realistic! In addition, there is an all-new strobe control never before available on a lightning simulator. This 1/4" jack can connect to professional strobe lights with a control jack. Then, the strobe will provide an extra 'kick' to loud thunder strikes. The louder the thunder, the faster the strobe fires!
A maximum of 3,000 watts of lights can be connected to the FF-351.
Not only will the test routine confirm proper operation of the FF-351, it will also test compatibility of connected lights in two ways. First each light will individually ramp from off to full brightness to confirm that they dim appropriately. Next, each light will be rapidly pulsed to confirm they have adequate response time for lightning simulation.
ADVANCED AUDIO SWITCHING
No more special cables or adapters required when doing special effects with the FF-351. You can easily choose the audio source for each channel independently. Even if you choose monaural audio for your lightning simulation, the FF-351 will still pass stereo audio through to your speakers.
The internal audio tracks use lossless (uncompressed) 16-bit audio sampled at 44.1KHz for true CD quality, resulting in far better audio than MP3 or other compressed files.
To protect the user as well as connected equipment, the FF-351 utilizes a switch mode power supply as well as solid state optical isolation to separate high voltage circuits from audio and control circuits.
FireFly® was designed to support a wide variety of lights. For best results, we recommend our ProLight™ 400 high-power LED light, which we designed specifically for lightning simulation. The intense white light and quick reaction time of these lights is unsurpassed in simulating lighting. FireFly® also supports dimmable compact fluorescent, some dimmable LEDs, conventional incandescent, cold cathode, and Halogen bulbs.
In order to insure that lights fire quickly and offer the appropriate dynamic range, adjustable threshold controls are accessable via the Menu button for easy end-user optimization.
At any time, FireFly® controls can be restored to factory default via the Menu control.
The FF-351 uses digital phase cut dimming so that the intensity of the light directly corresponds with the amplitude (volume) of the thunder.
Lights Alive provides an unprecedented three (3) year limited warranty on all FireFly® models. We will repair or replace (our option) any unit that fails within three years of the purchase date due to defective materials or workmanship. This warranty will not apply to units that have been modified or that have been subjected to physical abuse. For warranty service, simply call or email Lights Alive for a return authorization number, then return the unit, prepaid, to Lights Alive along with your proof of purchase. Please insure your package as we cannot be responsible for damage incurred during shipping. We will promptly repair or replace your unit and return it by the most economical means. If you prefer expedited shipping, please contact Lights Alive for shipping costs.
Regardless of its age, Lights Alive currently offers 50% of your documented purchase price toward the purchase of any higher model FireFly lightning controller. Simply call or email us for details on how to return your existing unit. We’ll send you an invoice for the new model and ship it to you immediately upon receipt of the upgrade costs. This offer may be modified or discontinued without notice and is good only for upgrades purchased directly from Lights Alive.
FireFly® FF-351 has built-in 16 bit, 44.1kHz CD-quality audio, which can be played continuously ("looped") or triggered externally for "lightning on demand." In the event a user wants to use their own audio, FireFly also operates with standard line-level audio via a conventional 1/8” stereo jack. Various adapters and cables are available from Lights Alive or through your local electronics store. Please consult with Lights Alive if you have connection questions.
MADE IN AMERICA
FireFly® is proudly designed and manufactured by Lights Aliv